Clik here to view.
Re: Creo Simulate 2.0 - Modal & Dynamic Frequency Analyses
There must be something wrong with dating of posts. I know I posted that a couple of years ago.
View ArticleMeshing sectioning and details
Hi!Just I wish to Review the elements type and size detail that CREO 2.0 Academic Edition has created and applied AutoGEM controls in the process of meshing. I could see the whole model but I have...
View ArticleMotion Induced Stress Analysis
Hi, I often have to review steel weldments for structural integrity which are located on a moving vessel (Pitch, Roll, Heave etc). Previously I have calculated the forces induced due to the vessel...
View ArticleRe: Creo Simulate 2.0 - Modal & Dynamic Frequency Analyses
I noticed several post in the community that I made several years ago, and they are showing up only 7 days ago.
View ArticleClik here to view.
Re: Meshing sectioning and details
Hi Luis, You can plot any component from an assembly, as detailed in the attached post: https://www.ptcusercommunity.com/thread/126949 Welcome to the forum.
View ArticleRe: Simulate Results window stops opening
Some updates: Even with the suggested driver the problem happened again - and this time after the 1st simulation! So it does not seem that the new video drive is the final solution. The IT guy told...
View ArticleK matrix
Hi all,do you know how to read the stiffness matrix?I've read of a method for understand whether the K matrix is ill-conditioned.It consist in the calculus of the condition number of K expressed as the...
View ArticleRe: Simulate Results window stops opening
If PTC Support does not communicate properly, then escalate your Case.
View ArticleClik here to view.
Re: Meshing sectioning and details
If I understand your question correctly, you want to look at the mesh of a specific part (hidden by other parts) before you run the analysis?The way I wowuld do that is to mesh the inner part first,...
View ArticleRe: Creo Simulate 2.0 - Modal & Dynamic Frequency Analyses
I believe what happened is that the post date was updated when we migrated this discussion from the former "Creo Simulation" group to the Analysis and Simulation product sub-space.
View ArticleRe: Creo Simulate 2.0 - Modal & Dynamic Frequency Analyses
Strange hypothesis, have you been migrating this as late as september 2? Steven's post was on the top of the list of simulate items that day. I wouldn't have answered it if it was dated further back.
View ArticleRe: K matrix
Hi Giulio It's always been my understanding that Simulate does not use a regular stiffness matrix. The relevant matrix does not contain true stifnesses, it is filled with data derived from the...
View ArticleRe: Motion Induced Stress Analysis
Hi Hugh It seems to me that all your examples can be described using an acceleration. You can define this using a gravity load (heave), or a centrifugal load (pitch/ roll). you will have to find a way...
View ArticleRe: Meshing sectioning and details
Luis, I think I understand that you're concerned about viewing meshed bodies in the pre-processing phase, not the post-processing. The previous link that I provided was only for post-processing, as...
View ArticleClik here to view.
Re: Meshing sectioning and details
Luis, I've attached an image of a meshed body in an assembly, but Mats has already demonstrated this, but you want to hide all the other components.
View ArticleRe: Meshing sectioning and details
Thanks for all your comments. Now I have the solution for my "Problem".
View ArticleRe: simulation of thermal expansion
The only issue I remember with an imported load, was that there was a scale factor, which - for whatever reason - by default was 0, so everything evaluated to zero.
View ArticleRe: creo simulate save error
I found a similar case in our internal database: The model had been sent to PTC Technical Support for investigation and R&D found out that the model had some data corruption, that needed to be...
View ArticleRe: Dynamic Frequency Analysis
Do you mean you want to define the load, depending on the frequency?
View ArticleClik here to view.
Re: Large defromation calculation
Some combinations of features and options do not work well together.For example in older versions you could not run contacts and LDA together.In Creo parametric 2.0 or later it should be generally...
View Article