Re: FEM Book?
These authors Szabo and Babuska developed the p-method for FEA, which Creo Simulate uses. http://www.wiley.com/WileyCDA/WileyTitle/productCd-0470977280.html
View ArticleRe: Singularity on edge, trying to remove
Paul, All This is the problem of clarity of objective. (the skills will follow as your questions here will be more surgical). 'Here's a conrod, what are the stresses?' is a poor question. It is just as...
View ArticleClik here to view.
Re: PTC CREO SIMULATE THERMAL STEADY
Hello Good Morning Mr Charles and all, The first Answer that said me is correct, but I don't need arrow, I need the same but with curves...Curves which initially begin from vertical line Input to...
View ArticleRe: Center of Gravity is not changing
What's the total mass - is it realistic or is it several ton(ne)s? If it's higher than you expect, check the individual component masses (click the 'i' icon to open up a larger window with the full...
View ArticleClik here to view.
Re: PTC CREO SIMULATE THERMAL STEADY
Hi all and Mr. Charles Our customer is working with Creo Parametric... But use "I-deas" for simulation And with "I-deas" can to get these curves... with an analysis thermal.
View ArticleRe: Singularity on edge, trying to remove
Thanks Charles! one of the answers I wanted to hear (read!)
View ArticleClik here to view.
Re: PTC CREO SIMULATE THERMAL STEADY
Gorka, I understand. I don't think it's possible. Does anyone else have any thoughts? You want the temperature 'streamlines'. Each of these streamlines can start from an arbitrary point on the...
View ArticleRe: FEM Book?
I can't mark both as correct anwers! Thank you both of you. I'm starting now with the Szabo and Babuska book.
View ArticleClik here to view.
Re: Center of Gravity is not changing
I neglected to mention that before I put those on I put two 3"x3"x3" blocks of assigned iron on. It was unchanged then and that led me to go a little over the top. The weight is very close to what I...
View ArticleClik here to view.
Re: Center of Gravity is not changing
Hi, to re-compute mass properties, click File > Prepare > Model Properties > change (in Mass Properties row)> Calculate (in Mass Properties dialog box). MH
View ArticleRe: PTC CREO SIMULATE THERMAL STEADY
Hello, Good Morning The image temperature graph you show me also I needed it. I also believe that's not possible to get the normal steamlines to iso-temperatures or normal to vertical heat input line....
View ArticleRe: FEM Book?
HelloForthosewhowould like to getafirstideaofRoark's.Butthepaperedition8emismuchbetterandlargerformat.Kind regards.Denis....
View ArticleClik here to view.
Re: Singularity on edge, trying to remove
Paul, For this particular problem, you can add a 1mm round to all the corners, as shown below, place a measure in the highly stressed area, and plot a 1% convergence. The attached file has no errors...
View ArticleClik here to view.
CREATE CODE FOR TO GET DATUM CURVES OF THERMAL ANALYSIS
Hi All, For the next question, I'm asking for the solution. Because I'm beyond me and I don't have skills. In the next Link, I expose my problematic with analysis Thermal. PTC CREO SIMULATE THERMAL...
View ArticleRe: CREATE CODE FOR TO GET DATUM CURVES OF THERMAL ANALYSIS
Gorka, I don't think I understand your problem. Is this a container filled with water, and you want to analyze the heat conduction in the water, assuming it does not flow around? This is perhaps the...
View ArticleRe: CREATE CODE FOR TO GET DATUM CURVES OF THERMAL ANALYSIS
Hello Mr. Mats and all. Good Morning. I don't know if you seen the next link in the initial discussion: PTC CREO SIMULATE THERMAL STEADYThere I explain with other colleague about as to try to get the...
View ArticleRe: CREATE CODE FOR TO GET DATUM CURVES OF THERMAL ANALYSIS
This support document explains the output files. You need to request ASCII output files. I wrote my script in Matlab where you also have possibility to generate the curves you need. I think you will...
View ArticleRe: CREATE CODE FOR TO GET DATUM CURVES OF THERMAL ANALYSIS
Thanks Mr. Mats I'll see these days I'll travel. As we say in Spain: Me pondré las pilas. BR,Gorka
View Article