Clik here to view.
Re: Finite friction blocks
Hi Christopher, Charles, and Eric, If I read your answers correctly and evaluate what other Simulate users told me, PTC really seems to have severe quality problems with Simulate, so it is not only...
View ArticleClik here to view.
Re: Getting fasteners to work
Hi Roland, Thank you for taking the time to reply. I think my problem is the "exactly two parts" requirement - I have three, and although they're not in series like a bolt and a washer, I suspect this...
View ArticleClik here to view.
Re: Finite friction blocks
Roland After finding out that I cannot file SPR's directly (It has to go through my reseller, which is very friendly and helpful, but I have no further influence). And after observing that no attention...
View ArticleHow to simulate a mechanism of 2 pistons coupled by a hose
We want to be able to drag/drive the piston of the first cylinder and see the piston in the second move as a result (because in reality the fluid chambers are connected). already tried a position...
View ArticleRe: How to simulate a mechanism of 2 pistons coupled by a hose
Add a gear connection after you create mechanism constraints.These will be linear. Not sure if you will need a rotary element or not without trying it. In that particular instance, being parallel and...
View ArticleRe: Different direction of the arrow on two identical mounting.
Hello Denis, I'd say it's coincidence.It looks to me as if these pictures just show different Euler modi for a long thin body, so both shapes should be possible (and probably some more). Regards, Gunter
View ArticleClik here to view.
Re: Different direction of the arrow on two identical mounting.
HelloGünter,Thanksforyournote.Iseeontheimagesthatthescaleofdeformationare11and38timesforabeamof3500mmlong.Itseems to methatthemostlogicalstrainisthegallows31?Kind regards.Denis
View ArticleRe: How to simulate a mechanism of 2 pistons coupled by a hose
It's so simple if you have found it! Yes! Could not find the option to couple linear movement to linear at first, but indeed with generic you can. Thanks Antonius
View ArticleChange density of all parts in an assembly - how?
Colleagues, I have an assembly, imported as Step, where all components have density=1 tonne / m^3. I need to change the density of all components to 7.8e-9. Is there any way to do this without changing...
View ArticleRe: Change density of all parts in an assembly - how?
Hi, open assemblyadd new column into Model Tree and put model parameter mp_density into itset density value for all components step by step using CTRL+V and ENTERMH
View ArticleRe: Change density of all parts in an assembly - how?
I noticed you can also set the density for bodies, parts or whole assemblies in the Mechanism Dynamics tab... This seems to be working.
View ArticleRe: Different direction of the arrow on two identical mounting.
Hello Denis, I am not convinced that gallows 31 is more likely than gallows 11 in this situation.If I remember correctly, for the Euler modi the probability is the higher the simpler the shape is.In...
View ArticleClik here to view.
Re: Change density of all parts in an assembly - how?
Another way would be to use modelcheck.
View ArticleFactors of safety
HelloIsitpossibleinCreoSimulatetomakearepresentationofthe scale offactorsofsafetyinaroomagainstconstraintsin thematerial.Andifit ispossiblehow.Kind regards.Denis
View ArticleRe: Factors of safety
Factor of safety is the ratio of expected performance to required performance and is based on a guess about what the required performance is. Since Creo Simulate can't guess what the required...
View ArticleClik here to view.
Re: Factors of safety
Doesn't PTC have some level of optimization code that could be utilized in design parameters?
View ArticleRe: Factors of safety
HelloIf you completed the information hardware limits, elasticity test, Fatigue,Itisnotpossibleto haveafeedbackonthesimulation.Kind regards.Denis.
View ArticleClik here to view.
Re: Factors of safety
HelloBycompletingtheinformationofmatteryieldsthe indexoffailure, whichisthe inverseoftheCoefficientofsafety.Kind regards.Denis.
View ArticleRe: Cluster/Distributed Computing für Creo Simulate?
> You need a license for each node.so there is an option to distribute the workload of a single simulation over multiple nodes? Do we need a standard simulation license or a special "distributed...
View ArticleRe: Creo 3.0 Simulate results "The selected window is empty as currently...
Hello Stig, a fix for the SPR 2875861 it will be included in Creo 3.0 M100, the SPR description is: " Using View Max in Creo Simulate results window shows information window with message No maximum...
View Article