Clik here to view.
Internal engine error Dynamic Time Analysis
I have a large (~250K shell and solid elements) assembly that I am seeking to do a dynamic time analysis on. I have successfully performed several static analyses and a modal analysis on the model....
View ArticleClik here to view.
Re: Internal engine error Dynamic Time Analysis
Well, I am not sure why you cant find those directories. I haven't tried looking for those directories whenever I have such an error. Yes, Simulate does create a lot of temporary files, and I do not...
View ArticleClik here to view.
Re: Solidify/Cut issue in Creo Simulate containing an assembly with pattern
Hi, model in simulate (fe) is not for cad features RegardsPaul
View ArticleRe: Mapped mesh and conflit with native Creo geometry
Hi, You wrote: "I consider a good contact mesh a mesh that has common elements in both sides of the contact"... In simulate (p-system) it is not so, but h-system. RegardsPaul
View ArticleRe: Mapped mesh and conflit with native Creo geometry
Hi In some simulations having contact I try to play with the mesh (as using mapped mesh) to try to reduce the solution time or better results around the contact area. Sometimes with good results but a...
View ArticleClik here to view.
Re: Mapped mesh and conflit with native Creo geometry
Indeed in some Creo Simulate courses (or even before, in WF) the instructor advised us that "generate compatible mesh" command could bring some problems during simulation - so it was better no use it...
View ArticleRe: Solidify/Cut issue in Creo Simulate containing an assembly with pattern
rrabe, I have not done an in-depth study of your 3D model, but is it possible that you could achieve the same results using 2D contact as shown in page 7 in the attached file? If so, this would be a...
View ArticleClik here to view.
Re: Solidify/Cut issue in Creo Simulate containing an assembly with pattern
In order for a solidify feature to remove material the feature used to cut the model has to meet certain conditions it doesn't just simply remove what's to the left or right of the plane. In the case...
View ArticleRe: Internal engine error Dynamic Time Analysis
Oluwaseyi, Thank you for the response! So I did some researching and found out that those files are PTC source code files, so they mean nothing to use because we don't have the source code. Also, it...
View ArticleFix problem introduced in Creo 3 Creo Simulate fasteners and materials fail...
Hi, I have found as of Creo 3 M080 that using simplified reps can cause issues with running Structural analysis in Simulate.Simplified reps cause materials, fasteners, or other simulate features...
View ArticleClik here to view.
Folding or bending of steel full bar
HelloHowisitpossibletosimulatetheforcerequiredtobendthissteelbarunderthetermsoftheattacheddrawing.You mustentertheinformationofthe steeltoexceedtheelasticlimit.Simulate 3.0 is it able to doKind...
View ArticleClik here to view.
Need a SPR link,can someone supply it?
I want to search a SPR case,but I can't find the web site,can someone supply it? Thanks!
View ArticleClik here to view.
Re: Folding or bending of steel full bar
HelloPaul,Thank youforthisvideo.Butthebardoesnotslide,itremainsfixedinthewall.It'sjustthepartB - Cwhichmustbendturntopoint B.Andthequestionishow much forceshouldbeappliedtoachievethisresult?Kind...
View ArticleCETOL 6 Sigma problem when analysing dimensions variations in a lens
Dear All,Recently I`ve tried analysing a variation of a dimension in the lens. The variation of the dimension that I try to analyse is 2.036 (refer to the attachment). The dimension that affect the...
View ArticleClik here to view.
Re: Folding or bending of steel full bar
Hi, question: You can use measures RegardsPaul
View ArticleClik here to view.
Re: Need a SPR link,can someone supply it?
Hi, You access these from the ptc.com web page. Support tab, e support.Login Type in the number of the spr you are looking for bfn
View ArticleRe: Folding or bending of steel full bar
HelloNo,becauseatthe momentthequestionismoot.Kind regards.Denis
View Article