Re: PTC Creo Simulate License Problem
No this is not the first time since installing Creo Simulate Thank you for replying so quickly!
View ArticleClik here to view.
Re: PTC Creo Simulate License Problem
I used to get this type of problem, and I would have to restart the sever under lmtools. Search for your lmtool, probably in your flexnet folder. When you launch it, it should look like this: Go to...
View ArticleRe: Unable to select Hyperelasticity analysis in Static Analysis Definition
Don... Fasteners contain beams, you would require a solids only model if I remember correctly.Throw out the fasteners and see if you can select, then find an alternative aproach for the fasteners.Erik
View ArticleRe: PTC Creo Simulate License Problem
Buried in the "...\Common Files\M***\mech\text\licensing\mech" folder, there is a file named "feature.dat". In one of the releases, those license feature names were not matching up with the previous...
View ArticleSub-assemblies registering as 0 mass in top assembly?
I'm trying to run a dynamic analysis using a servo motor and just gravity for a landing gear, but everytime I try I get an error message stating parts have zero mass. I know it's the sub-assemblies...
View ArticleRe: Sub-assemblies registering as 0 mass in top assembly?
Based on general debugging (not so much with dynamics package) it is referring to bodies, not parts or assemblies. I know the analysis package puts items together as bodies, so look at the mechanism...
View ArticleRe: Sub-assemblies registering as 0 mass in top assembly?
I'm really new to this and taking an intro course so could you explain a little more in depth if possible? thank you!
View Articlesimulation problem on connection part
Hello everyone,I met a problem when doing simulation on the connection part. I tried to provied some force on the connection interface(see the attachment), but the analysis failed and the diagnostics...
View ArticleRe: Sub-assemblies registering as 0 mass in top assembly?
You will never get this error if each and every part has a density. By therory, only individual "bodies" need to have a mass, as David mentions. I have found that I never have issue if I am as formal...
View ArticleRe: Sub-assemblies registering as 0 mass in top assembly?
Is there any extra step I'm missing somewhere? All the parts are assigned materials in the part files and all the material files contain the density for each respective material.
View ArticleRe: Sub-assemblies registering as 0 mass in top assembly?
This may be one of those issues that is not possible to help diagnose unless we have your set of parts and assemblies. Do you have a "skeleton" part that you connect others to in a sub-assembly? If so,...
View ArticleRe: Sub-assemblies registering as 0 mass in top assembly?
Here's a zip folder containing everything, the only thing is it's the educational edition so I don't know if it'll be accesible. And no I don't believe I have any "skeleton" parts. Thank you for your...
View ArticleRe: creo simulate, multi-pass adaptive, number of passes
It is normal for a MPA to skip orders if it detects that the difference between runs is nowhere close enough for converging with the next order. I suspect the idea being to save you time in running...
View ArticleRe: Material file database (again)
Eric here is an update about how I got on - and another question! (should I post this on a separate thread?).I resolved my installation issues and familiarised myself with the advances in Simulate...
View ArticleRe: simulation problem on connection part
Hi, Your constraint is fully fixing the surface. Your load is acting on the same face. The constraint will win and nothing will happen. The software will warn of this load/constraint conflict in the...
View ArticleRe: Material file database (again)
Tony, For simpler problems such as increasing the pressure inside a cylindrical vessel until the material yields, clicking the 'unloading in 1 step' button has given quite different and (my opinion)...
View ArticleClik here to view.
Re: simulation problem on connection part
Hi ,Thanks for your reply, I fixed that and it works now
View ArticleRe: Material file database (again)
Anthony Absolutely beautiful, great work.I've done something smilar, but not as spectacular.Unloading has never worked for me (the automatic way). Same message as you got.I use an excel sheet that...
View ArticleRe: creo simulate, multi-pass adaptive, number of passes
Benjamin, and also Eric Convergence scheme for MPA is quite intricate. Iif there's no convergence for an element edge, order of the displacement field is increased by one. If there's no convergence for...
View ArticleRe: creo simulate, multi-pass adaptive, number of passes
Interesting, that would explain it. Thanks Erik!
View Article