Re: Planetary gear design
Attention:You will need to update your browsers Flash Player plugin to see videos on this site. Update your Flash Player here. Its free and fast.');}); });
View ArticleClik here to view.
Re: Density Field Disabled
Aaron, The issue is do to the model having a material file assigned to it. Once the material file has been assign you need to change the density in the material file or create a new material file with...
View ArticleRe: Creo Tolerance Analysis License Issue
This functionality is turned-on as a "Floating Option" - go to this dialog box and select it to add it to your menu pick.
View ArticleRe: Unable to select Hyperelasticity analysis in Static Analysis Definition
Erik, You are correct and PTC confirmed what you said. You currently can not use hyperelastic materials with Mechanica/Simulate Fasteners. The fasteners have to be solid models and no Beam Elements...
View ArticleRe: Mechanica - The meshed study model is geometrically incompatible with the...
I saw that message from time to time, Specially, when the create comparable mesh option was selected when creating contact interface on curvy surface.I did not experience that problem for the planar...
View ArticleRe: Mass properties are not calculated
Jonathan - You may have figured this out by now, but for anyone else, the answer is:File > Prepare > Model Properties, then click the "change" link in the mass properties section. You can then...
View ArticleClik here to view.
Unable to determine setting for export for "MOVIE" in Creo Simulate.
I all,For a long time now I have not be able to determine the setting for exporting a "Movie" from Creo Simulate. The picture quality is very coarse and the legends are not readable. This has plaque me...
View ArticleRe: Unable to determine setting for export for "MOVIE" in Creo Simulate.
NTSC WEB is going to be a small image. What else is hiding under that tab?
View ArticleRe: Unable to determine setting for export for "MOVIE" in Creo Simulate.
If I understand correctly, there are no other windows, just selections. From the pull downs with menu / window shown (light blue), I have options under the "output settings", I must be selecting...
View ArticleRe: Unable to determine setting for export for "MOVIE" in Creo Simulate.
Right... Firstly, you need to decide how long you want the clip to be, what fps it will play it (Simulate seems to like either 25 or 30) and how many times you want the animation to repeat during the...
View ArticleRe: Unable to determine setting for export for "MOVIE" in Creo Simulate.
David After fighting with this poor option for some time I've purchased Screencast-O-Matic, which works as Creo should have......You can have it for free, but it shows on each movie that it's a free...
View ArticleRe: Unable to determine setting for export for "MOVIE" in Creo Simulate.
I notice a compression setting that is near the High position. Use Low compression for a better image. The FPS setting is also one to play with, but it depends on the playing software. For example, to...
View ArticleRe: Unable to determine setting for export for "MOVIE" in Creo Simulate.
Not a bad deal, Erik. $15/yr including hosting is an attractive option.
View ArticleRe: Unable to determine setting for export for "MOVIE" in Creo Simulate.
Thanks for the advice - I did not think of using a "Screen recorder". Today I was at a Client and I noticed they had a program call "Snagit", a screen capture and recorder and we expertimented on Creo...
View ArticleRe: Unable to determine setting for export for "MOVIE" in Creo Simulate.
I use camstudio but it is not a quality recording. It is good enough to have it come out HD on YouTube and text is readable, but you do get a lot of dropped frames. All my screen cap videos are...
View ArticleMacro/Script/Auto-mouse-clicker for setting up results?
I make many graphs of stress along a capping plane edge and export as Excel. I currently automate almost all the 20 or so steps using WinParrot http://www.winparrot.com/ (The Creo 1.0 Results...
View ArticleRe: Macro/Script/Auto-mouse-clicker for setting up results?
AutoIT - no doubt. Some work, but no doubt.
View ArticleCreo Simulate Result Window template with legend values: bug?!
After a search on the internet with no result I try to ask my question here...I created a result window template with, amongst others, the option 'legend values'. (Easy when comparing different...
View ArticleRe: Creo Simulate Result Window template with legend values: bug?!
Hi Laurens, Can you upload the file? I would like to take a look at it.
View Article
