Re: Mapped Mesh on Fillet
Hi Paul, I have reviewed the image of your model. Your assumption is correct....for the fillet region you should be creating a WEDGE mesh. The available selection types for creating mesh regions are...
View ArticleRe: Mapped Mesh on Fillet
I need to see if it is ok to upload my clients model (which I think is doubtful). In the meantime. If you created a tube with an OD of .362" and an ID of .263" then added a .010" radius to the id on...
View ArticleRe: Mapped Mesh on Fillet
Oh....I forgot. I cut the assembly in half so I could apply a symmetry constraint.....
View ArticleRe: Creo 1.0 Simulate Issue - "Model is insufficiently constrained"
Hi Mark, Now I also get this kind of problem. Could you kindly tell me the detail about the material property issue.Thanks a lot. Raphael
View ArticleRe: Mapped Mesh on Fillet
Paul and Charles, I was able to create a mapped mesh of the geometry (or atleast on a piece of geometry I created to match yours); you can view the pdf here. This was done entirely in integrated mode....
View ArticleRe: Mapped Mesh on Fillet
Shaun, That certainly answers Paul's question, I used your method and then with 90 deg volume regions (which effectively gives the same vertices to pick). Keeping the subtended angle of any mapped...
View ArticleRe: Mapped Mesh on Fillet
Hello, Charles, It's justa story, asyou havereferred toRasna, for those who would not haveknown, even under DOS.Cordially.Denis.
View ArticleRe: Mapped Mesh on Fillet
Re-Hello, Charles, Oops,sorry,too fast,I forgot thedocument.Cordially.Denis. http://www.sendspace.com/file/5mrkon
View ArticleRe: Making a mirror part
The attached part pb1130411.prt fails when using File > Save As > Mirror Part with the option Mirror geometry with features due to Sketch 1 (#96, ID 91352), because it has extern references to...
View ArticleRe: Mapped Mesh on Fillet
Thanks! I got this to work using your technique. Funny, I was going to try breaking this up as well, but it would have taken me forever to come up with your method! Thanks again! -Paul
View ArticleRe: Making a mirror part
Thanks Gunter. I knew there was something wrong with the part, it's just that I didn't have time to trouble-shoot it, due to my workload. I didn't think there was anything wrong with the software....
View ArticleRe: Making a mirror part
Hi all,I apologize for the late response.The part I've posted (pb1130411) has, actually, an external reference and it causes some problem with the "mirror operation". But my question is oriented, not...
View ArticleRe: Making a mirror part
If you mirror the part "without features" it remains dependent on the original and should follow all changes. Agreed that this is limited functionality but overall, there are a few options for the...
View ArticleRe: CREO 2.0: Creating surface/volume regions in subcomponents of assembly
Hi Jack, A few more points on adding a surface region or volume region to an assembly. 1) These features are added to a component not the assembly. Once you select the component, you can sketch your...
View ArticleRe: Mapped Mesh on Fillet
Hi all, Sorry for the delay in responding. Thank you Shaun for providing the steps for creating the mapped mesh for this particular part. As you can see building the framework via a sketched feature...
View ArticleRe: Mapped Mesh on Fillet
Ah, thanks. From the RASNA references I'd assumed it was something that had been there all along, just hidden somewhere...
View ArticleRe: Mapped Mesh on Fillet
Hi Paul, I was digging into the issue related to keeping the subtended angle of any mapped region <=90deg to avoid the 'self intersecting' error with the Simulate development team yesterday....
View ArticleRe: Mapped Mesh on Fillet
I'm trying to mesh something similar to the example. I've got bricks working for the three rectangular areas, but for the fillet 'triangle' (using wedges) I get errors such as "Mesh region is not...
View ArticleRe: Mapped Mesh on Fillet
Hi Jonathan, Can you send me the model at mfischer@ptc.com? Thanks,Mark
View Article