Re: FEA...How to define roller bearing constraint in mechanica ?
Vaibhav, You will find some useful tips in the attached file from Urs Simmler for roller-bearing constraints. Start on Page 23 and work your way through Page 27. Weighted Links: "Tips & Tricks"...
View ArticleRe: Ancient Pro Mechanica Motion on Windows 7
Swapping architecture doesn't work - simply stops the Motion GUI working at all.Not sure how to create a motion batch file as opposed to the structure ones, which we did regularly.Just trying a 32bit...
View ArticleRe: FEA...How to define roller bearing constraint in mechanica ?
Thank you for this link.
View ArticleClik here to view.
Re: FEA...How to define roller bearing constraint in mechanica ?
It worked. Thank you Jonathan.
View ArticleClik here to view.
Re: Does MathCAD Express support region tags? Does Creo 3 support Analysis?
Some video:1. "Creo Parametric and Mathcad Prime 1.0 Integration (Transmission Shaft)": http://communities.ptc.com/videos/45022. "Creo Parametric 2.0 integration with Mathcad Prime 3.0":...
View ArticleForce and stress on pipe
Hi, I have a titanium pipe of 6.35mm /1/4 inch) diameter with a wall thickness of 0.8mm. I want to place a 2 mm thick "collar" 10mm from the end of the pipe that will apply a compressive force to the...
View ArticleClik here to view.
Re: Force and stress on pipe
Try making a surface region to represent the area where the collar would make contact with the pipe and apply the load on that surface.
View ArticleRe: Force and stress on pipe
Erik, I see you're in Sweden, but I stick to english for the sake of other forum members. I'm not 100% sure I understand your problem correctly. This sounds like a problem that can be run using 2D...
View ArticleRe: P vs h-type
Hi Steven,Could you let me know what literature the above article is from? Thanks.
View ArticleRe: Force and stress on pipe
If you're going to run 2D, make sure your surface is in the positive XY plane, or you will get an error.
View ArticleRe: Force and stress on pipe
Thank you for your help. I'll try this next. Yes, it is a shrink fit. I've asked my supplier for the force information but I'll try this as well.
View ArticleClik here to view.
Isolate for exclusion control of surfaces
Hello! I have a question!How can I create an excluded area in a model?For example, in this case I want to isolate from analysis the edge of nozzle-shell junction, and is simple.But I wont also isolate...
View ArticleRe: P vs h-type
It's from Dr. Toogood's book as shown in the attached link. He has newer versions now for Creo Simulate....
View ArticleRe: P vs h-type
Creo Simulate release: http://www.amazon.com/Creo-Simulate-Tutorial-Releases-1-0/dp/1585037583/ref=la_B00J1WQQC4_1_2/175-7986978-0398902?s=books&ie=UTF8&qid=1440543404&sr=1-2
View ArticleRe: Force and stress on pipe
Thanks again. I got it working in 2d axisymmetry and so much quicker. Really good advice.
View ArticleClik here to view.
Simulation Results - copy clean image to clipboard enhancement request
The way I communicate the simulation results is most often to make a screen clipping and paste into a PowerPoint or email. Starting with 3.0 the results viewer is more difficult to capture a clean...
View ArticleClik here to view.
Save higher resolution video
The highest video resolution you can currently output from Simulation is 720x480. This seemed appropriate 10 years ago, however for a really professional presentation I would like to have options to...
View ArticleRe: Save higher resolution video
Hi Chris, Maybe you should post this as an idea. As an alternative, if you want to do nice animation, you could use Keyshot.
View Article