Re: Solver automatic load factor reduction
Thanks Patrick and well reminded. I have used the output tab in the past but usually use the load function. I have never really understood why we still have this in the output tab since load steps came...
View ArticleClik here to view.
Re: Simulation non linéaire avec matériau élasto-plastique
Hello All (not just Laurent) I thought I'd do this as I am asked regularly about this and hope it helps generally. Let me know if I have made any mistakes and I will fix The deformation units are...
View ArticleRe: Simulate Results Definition (.rwd) Files
I heard from Product Line Management that they plan to reimplement the ability to load multiple result windows from template, by simply adding (instead of replacing) windows when opening *.rwd files....
View ArticleRe: Simulate Results Definition (.rwd) Files
Hi Steven, yes, internal SPR 4887207 got created soon after my post - not sure whether you can see it on the PTC web site. Gunter
View ArticleClik here to view.
how does one link orthotropic material properties to a custom coordinate system
I would like to apply orthotropic material properties to a single part in my assembly model and have created a coordinate system for this component. When I try to edit my material to apply...
View ArticleRe: how does one link orthotropic material properties to a custom coordinate...
HelloDavid,.Ididnotfullyunderstandyourquestion,findyouthevaluesofAL2014,asforexampleontheattacheddocument.Kind regards.Denis
View ArticleRe: how does one link orthotropic material properties to a custom coordinate...
In the table above there are boxes for E1 and E2/E3. How does one know which directions these properties are for? If one wishes to have certain properties apply directionally to a local coordinate...
View ArticleClik here to view.
Re: how does one link orthotropic material properties to a custom coordinate...
I just found that you apply the orientations in the material assignment. That is the correct answer.
View ArticleClik here to view.
How to display reference plane or curve in mechanica analysis result?
As shown in down figures.In first figure, there are three defined curves, to act as deformation reference for the part, but in the second figure, in the mechanica analysis result, the curves will not...
View ArticleRe: Simulation Results - copy clean image to clipboard enhancement request
It appears that all export options are consolidated in a single 'File > Print' dialog (including exporting image) in Creo .
View ArticleRe: How to display reference plane or curve in mechanica analysis result?
I would create beam elements on those curves,and make those beams rigid, either by using rigid links, or constraints. You can only view elements, not CAD geometry without elements, in results. Another...
View ArticleRe: How to display reference plane or curve in mechanica analysis result?
Yulong, I submitted a Product Idea to add more visuals to the results window. https://www.ptcusercommunity.com/ideas/6542
View ArticleRe: Creo vs ANSYS - Stress Linearization Graphs to Compute Kt
Product Idea submitted to compute Kt automatically. https://www.ptcusercommunity.com/ideas/6527
View ArticleRemove interference material as a result of mechansim
I am running a mechanism of essentially a gear shape. I would like to male tooth to cut out the female section as a result of the motion I have defined. These aren't really gears but a special profile...
View ArticleClik here to view.
Re: Mold Analysis Lite
The document CS187881 is a bit misleading, it states: If customers have purchased active Plastic Advisor licenses on or before 17-Oct-14, they will receive the new licenses with CMA codes at no...
View ArticleClik here to view.
Weighted arithmetic mean of stress in Creo simulate 2.0 ?
Hello,I need to find on a selected zone the value of the average stress weighted on the area. Create a custom surface and view the results of the analysis only on that zone is not a problem, i want to...
View ArticleClik here to view.
Re: Remove interference material as a result of mechansim
I have never tried this, but I suspect it is possible to create a "motion envelope" of the new gear geometry. The "problem" in this case, is that the motion envelope is fixed relative to ground. So you...
View ArticleClik here to view.
Re: Remove interference material as a result of mechansim
Next attempt would be to create a "trace curve" from the "male" onto the "female" paper part. In this case you can prescribe motions to the parts as you wish. This only creates the profile of a single...
View ArticleClik here to view.
Re: Remove interference material as a result of mechansim
I've done this not using Mechanism, but by creating a surface of the 'male' tooth and then patterning it at very small increments. The increment size was limited by accuracy / regen issues so the...
View Article