Clik here to view.
Re: FEA analysing the Framework extension design (Formula Student Chassis...
Teofil, Have you considered building your frame with the Beam Tool in Simulate? Since the chassis is made up of tubes, this can be done easily. The problem I see with your model is that it's not...
View ArticleRe: Hyperelastic material with contact – looking for the best approach
Ok Finally one simulation finished - the one with displacement input. Some information that may help It is a 1/2 model with mirror symmetry (similar to my 1st picture in this thread)I let some of the...
View ArticleClik here to view.
Re: FEA analysing the Framework extension design (Formula Student Chassis...
If you insist on having a 3D solid model, consider redesigning the joints where they all have smooth transitions with rounds. In reality, these joints will probably be welded. With a 3D model, you...
View ArticleRe: Planar Constraint
HelloNobodyhasan explanationonthisplanestressalwaysforcingtheZaxis?Kind regards.Denis
View ArticleRe: Planar Constraint
You may have better luck getting an answer by moving this to Analysis and Simulation group. Ryan Kelley can move this post to that group
View ArticleRe: Planar Constraint
Thanks for notifying me, Stephen. I've moved this discussion into the Analysis and Simulation sub-community as you suggested.
View ArticleProblem with Mechanism Connection
Hello, please watch the video, I want that the upper parts stop when they have connection to the grey sheet-metal part.I tried with cam follower connection, but without success.
View ArticleClik here to view.
Titles on Creo 3.0 Simulate Results Windows
Does anyone know if there is a way of making the title of a results window visible in Creo 3.0 Simulate (M020)? This was possible easily in Creo Simulate 2.0 and now it does not do it. Is this a bug or...
View ArticleClik here to view.
Re: Titles on Creo 3.0 Simulate Results Windows
Colin, Does this help? Titles are no longer along the bottom of the window Regards
View ArticleClik here to view.
Re: Titles on Creo 3.0 Simulate Results Windows
Charles Thank you very much for your response. What I would like is for the title to be in the window so that when I "print" a plot it has the title in it, see Creo 2 example attached. Is there any way...
View ArticleClik here to view.
Re: Titles on Creo 3.0 Simulate Results Windows
Colin, The short answer is ... no. In Creo 3, the title is only where I have indicated. Your options are limited to 1. Annotating in the software2. Grabbing the window and annotating using the drawing...
View ArticleRe: Titles on Creo 3.0 Simulate Results Windows
Charles Thank you again for your response. You have been very helpful. I was hoping that you might say its remedied in an update or I am missing something but it seems more like PTC have removed a...
View ArticleGeneral questions regarding static analysis
I have carried out a few design analyses with Pro Mechanica and understand that the following steps need to be executed to analyze any part. Please correct me if I am wrong below : - 1. Design the...
View ArticleRe: Problem with Mechanism Connection
Hi Maximillian,After looking at your video, I understand that the upper parts don't have any connection to the grey sheet-metal part. May I suggest a workaround where, there is a very thin, transparent...
View ArticleRe: Problem with Mechanism Connection
You can use a cam-pair to get this situation (flat surface-to-flat surface) to behave properly - I have done it hundreds of times myself. The key is that one of the surfaces that makes contact needs to...
View ArticleRe: General questions regarding static analysis
1. I believe it is possible, using "inertia relief", but i highly recommend against it. The problem is that the software compensates for any static movements, but it does not show you it is doing this....
View ArticleRe: Problem with Mechanism Connection
Maximillian,If you are only interested in stopping the upper parts for an animation, you can use the mate option in the snapshots dialog box, take a snapshot at that position, then use the snapshot as...
View ArticleClik here to view.
Re: Pro/E, ANSYS & Windchill all rolled into one... (help)
I also got an user inquiring if he can get the geometry directly from Windchill PDMLink. He makes no changes to the files but only run an analysis over minor changes to the cad data from other desing...
View ArticlePTC_TENSILE_YIELD_STRESS
HelloI getthismessagewhenIwant to setthematterinCreo3.0.Orcanonelearnthisinformation. ThePTC_TENSILE_YIELD_STRESSparameterisnotdefined.Thematerialisnotvalid. Kind regards.Denis
View Article