Clik here to view.
Re: Fasteners references edges definition error
Product Idea to add countersink fasteners. https://www.ptcusercommunity.com/ideas/3783
View ArticleClik here to view.
Re: Fasteners references edges definition error
Mats, Here's a common problem we've seen over many years when trying to analyze fasteners going through two tubes (image below). The outer tube rotates around the inner tube. This problem would not...
View ArticleRe: Fasteners references edges definition error
Hi Steven, thanks for your clarification, bye
View ArticleRe: Fasteners references edges definition error
In your specific case, you could: - in the outside (bolt head), connect the upper end point of the beam with the only edge, since bolt head <-> pipe contact in this side is ideally (i.e....
View ArticleRe: Fasteners references edges definition error
Creo 3.0 added Account for Stiffness in the preload, so the user only has to make one intervention instead of two, as in Creo 2.0.
View ArticleRe: Fasteners references edges definition error
Yes, I think this would be a suitable case to model beam elements+links and a temperature load.
View ArticleCetol 6 Sigma vs PTC Creo Tolerance Analysis Extension
We have Cetol but wanted to know if there is any advantages or loss of functionality to going to PTC Creo Tolerance Analysis Extension?
View ArticleRe: Cetol 6 Sigma vs PTC Creo Tolerance Analysis Extension
I believe Creo tolerance analysis ext. is only 1 D. The full CE-tol can analyze the impact of geometric variations in 3D.
View ArticleRe: Cetol 6 Sigma vs PTC Creo Tolerance Analysis Extension
Yes - Mats is correct, Creo TAX is only 1-dimensional and CeTOL is 3D. Creo TAX is written by the same poeple who created CeTOL, so the underlying calculations are very similar. Post-processing is...
View ArticleClik here to view.
Re: having simulation problem"The model is insufficiently constrained for the...
HelloAbbas,Yourquestionistoovague.Couldattachyourfilesothatyoucanseeortheproblemlies.Kind regards.Denis.
View ArticleClik here to view.
Re: Creo 3.0 Simulate results "The selected window is empty as currently...
In the hope that it helps those trying to locate the problems with the results window in Creo 3.0: Every time I delete a query tag, the following error message pops up:In spite of the error message the...
View ArticleRe: having simulation problem"The model is insufficiently constrained for the...
Add more constraints!
View ArticleRe: having simulation problem"The model is insufficiently constrained for the...
I received this error last month. This may be due to I have given constraints on points and I forgot to attach points to geometry with beam element. But anyway please send some snapshot to have a look...
View ArticleRe: having simulation problem"The model is insufficiently constrained for the...
Did you try the suggestion Mechanica / Simulate gave you when you got this error? If you run a model analysis it will show you which degree of freedom you are missing.
View ArticleAssistance Needed with Analysis Feature for 2 Variables
Creo 2 (m130) I am working with several parts that have cam slots and I want to provide a graph of cam angle vs. projected distance traveled (due to the way they were modeled, I cannot pull this info...
View ArticleRe: Assistance Needed with Analysis Feature for 2 Variables
I'm not sure I understand your problem entirely but I would typically do this in mechanism design and not in BMX. But I think it should work in BMX aswell. From your description I think it is not...
View ArticleRe: Assistance Needed with Analysis Feature for 2 Variables
That worked perfectly! I have my data and graph now. Thank you for your help.
View ArticleClik here to view.
Clik here to view.
Fasteners analysis.
Hello could someone please help me to understand how can i run a simulation with fasteners? for an exemple on the model below i have a part and a support both connected by fasteners and with a pre load...
View Article